Free used power supply (working on 110v (USA) or 220v (Europe) )
Free used Power cord
You’ll just have to plug it and you’ll be mining….
Used Antminer S7 in « A » WORKING condition! and in « B » Taking a look condition HAVE small scratches and dust but does NOT have an effect on performance of the miner.This was once pulled from a rack of equipment mining at full hashrate. Sold as-is, no warranty, no returns. I have seen this Antminer S7 get to 5TH on their own without any overclocking.
· S7/S7-F1 version send randomly(S7-F1 is the upgraded version)
· We will send you with a free used power supply working on 110V. Brand of PSU may varry
· We will ship within 5-10 working days after you pay. All Miners are tested before shipping
THESE UNITS ARE GREAT — I RUN MANY OF THESE UNITS BUT JUST NO LONGER HAVE ROOM FOR ALL OF THESE IN ADDITION TO NEW SET OF MINERS WHICH ARRIVED IN Begin NOV. BE SURE TO LET US KNOW OF ANY QUESTIONS|CONCERNS
No International Shipping
THE UNIT IN THE PHOTO IS ONLY AN EXAMPLE UNIT. EXPECT SOME VARIANCE IN CONDITION. AGAIN, ALL UNITS SOLD IN THIS BATCH WERE DECOMMISSIONED WHILE RUNNING AT FULL HASHRATE +/-5%.
1. Hash Rate: 4.73 TH/s
2. Power Consumption:
1293W ±10% (at the wall, with APW3, 93% efficiency, 25C ambient temp)
3. Power Efficiency: 0.25
W/GH ±10%(at the wall, with APW3, 93% efficiency, 25°C ambient temp)
4. Rated Voltage: 11.60
5. Chip quantity per unit:
7. Cooling: 2x 120mm fan
8. Operating Temperature:
0 °C to 40 °C
9. Network Connection:
10. Default Frequency:
Please note the following:
1. Power consumption
figures will vary with your PSU’s efficiency, the ambient operating temperature
and the accuracy of the power meter. Figures provided are at the wall, with
AC/DC 93% efficiency, and 25°C ambient temp.
2. Separate power supply to keep watch over board: there may be one
additional 6pin PCI-e connector at the IO board which should be connected to the
PSU to get power. If you use different PSU for hash boards and keep watch over board,
please be sure to power the hash boards first and the keep watch over board only
after the hash boards have been powered.
Warranty and Returns
There is no warranty on miners/psu as those are used. Asap you receive the miner, please test it and confirm us its working. If you don’t confirm us after 72h that miner is working we’ll believe all is good
No Returns are accepted